![]() If the component turns off that means the control already found the code for it to pair with your device. Once you’ve done this part, use the power button on your remote control to scan the code needed to set up your device.The Power button light must stay on… if it does not, repeat steps 2 and 3. Release both the Power and the device button.Most of the time this takes up to five seconds. Press and hold the device button at the same time as the Power button, until the light turns off and on.Wait for the light on the remote to blink and then stay steady for you to follow the next step. Press and hold the button that matches the device you are pairing.Manually turn on the device you want to set up, making sure that your RCA remote is aiming toward it.Here are the instructions you need to follow. Say, for example, DVD, streaming device, Blu-ray, etc. The first thing you need to make sure is that your remote has an option for it. Programming your RCA universal remote for other devices Try out the remote to make sure everything is working properly.Enter the device code you found in step 1.While holding the code search button, press the button on your RCA remote that matches the equipment you’re pairing (e.g.Press and hold the code search button on the remote.Turn on the TV that you want to pair with your remote.Find the device code for the equipment in your remote’s manual or the RCA remote code finder. ![]() Just repeat these steps, ensuring you are pressing the buttons the full time needed. If this process does not work, try to be patient. Once the device turns off, the remote control should be in sync with your TV. Repeat this process every five seconds until the device turns off. If it does not turn the TV off, press the Play or Slow button again.
0 Comments
Leave a Reply. |